ITO Glass

In line to meet proper needs and requirement of precious consumers, our firm has presented best range of ITO Glass.ITO Glass products are superior in quality and completely safe to use for longer time. Professionals prepare ITO Glass products very keenly and present in market in safe from. We used to supply the ITO Glass World Widely.

Features:

• Easy to use
• Reliable
• Quality checked

Specification:

• Coating - Single Side
• Resistivity - 10, 15, 20, 60, 100ohms/sq.
• Thickness - 0.8mm, 1.1mm, 2.2mm and 3.2mm

Indium Tin Oxide coated glass substrate

Shilpa Enterprises is a manufacturer and supplier of the Indium Tin Oxide coated glass substrate under the brand name of ShilpEnt. It is a trusted name in conductive glasses. We are used to supply this Indium Tin Oxide coated glass substrate World Widely as well as Nationally.

Specification:

• Resistivity - 7-100 ohms
• Transmitance - > 85%
• Thickness - 0.5mm, 0.7mm, 1.1mm

ITO Coated Glass Substrate
ITO Coated Glass Substrate has highly electrical conductivity yet with excellent transparence. It has been widely used in flat displays. The surface resistance of our ITO Coated Glass Substrate can be ranged from 8~100 Ohm/sq with the optical transmittance over 85%. Larger sized. ITO Coated Glass Substrate is available upon request. ITO (Indium Tin Oxide) glass slides provided from Shilpa Enterprises were made by coating ITO to single side of soda lime glass. These ITO coated glass, also called transparent conductive glass (TCO), come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness from 0.5 mm to 2.2 mm. ITO coated glass has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated glass has excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO Coated Glass Substrate is over 85% in the visible range.

Specification:

• Surface resistivity: 5~100 ohm/sq, see individual product label;

• Glass thickness: 0.55 mm, 1.1 mm or 2.2 mm;

• ITO thickness: 30~600 nm depends on ITO surface resistivity:

• Optical transmission: 83% to 90%;

• ITO glass size: 1 cm to 10 cm, customer size available upon request.

Indium Tin Oxide Coated Glass Slides

Shilpa Enterprises is a manufacturer and supplier of the Indium Tin Oxide Coated Glass Slides under the brand name of ShilpEnt. Indium Tin Oxide Coated Glass Slides is a trusted name in conductive glasses. We used to supply this Indium Tin Oxide Coated Glass Slides World Widely.

Specification:

• Resistivity - 7-100 ohms
• Transmitance - > 85%
• Thickness - 0.5mm, 0.7mm, 1.1 mm

ITO Glass Slides

Shilpa Enterprises has long offered a product line of ITO Glass Slides products in different ITO Glass Slides coating thicknesses or resistivities. High transparency (from UV to NIR) ITO Glass Slides coatings have applications not only for microscopy but also when planar, electrically conductive surfaces are required that have the indicated transparency. Our ITO Glass Slides coatings provide good transparency and good conductivity with reduced charging of the substrate surface.

 

High Temperature Applications:

We have some test data on our ITO coating subjected to high temperatures for 3 x 12 hours cycles. Changes in resistance was observed and were found to be larger as temperatures got higher.

• 160 degree C 3 Cycles 2.5% Sheet Resistance Change
• 210 degree C 3 Cycles 4% Sheet Resistance Change
• 250 degree C 3 Cycles 16% Sheet Resistance Change
• We do not recommend using this product at temperatures higher than 350 C.

Specification:

• Resistivity: 10 - 100 ohms/sq.
• Thickness: 0.7mm, 1.1mm, 2.2mm, 3.2mm
• Transmittance: > 83%

ITO Film Substrate

Shilpa Enterprises is a manufacturer and supplier of the ITO Film Substrate under the brand name of ShilpEnt. It is a trusted name in conductive glasses. We have the different types of the ITO Film Substrate with different resistivity. We used to supply this ITO Film Substrate with different resistivity. We used to supply this ITO Film Substrate world widely. Substrate world widely.
Specification:

• Resistivity - 7-100 ohms
• Transmitance - > 85%
• Thickness - 0.5mm, 0.7mm, 1.1mm

ITO Glass Cover Slip

Shilpa Enterprises is a manufacturer and supplier of the ITO Glass Cover Slip under the brand name of ShilpEnt. It is a trusted name in conductive glasses. We used to supply the ITO Glass Cover Slip World Widely.

Specification:

• Resistivity - 7-100 ohms
• Transmitance - > 85%
• Thickness - 0.5mm, 0.7mm, 1.1mm, 2.2mm