A multi foil gas sampling bag (multi-layer gas sampling bag) is a type of sampling bag that is functional to collect whole air samples. The device specializes in collecting high-level VOCs and permanent gases. The Multifoil gas sampling bag is a reliable device that shows gas stability in lower molecular weights. It is the best option in traditional canisters, helpful in collecting indoor and outdoor air samples. The structure of the bag consists of 4 layers. The outermost layer of the bag has 60-gauge nylon followed by two layers of 0.0003-inch thick aluminum foil. The last (innermost) layer of the bag has 0.002-inch thick роlуеthуlеnе. As the bag consists of aluminum at the outermost layer, researchers term it an aluminum foil gas sampling bag.

The air sampling activity is necessary to meet the standards and norms set by the government for pollution control and air quality index values. The examinations are essential to check part-per-billion (ppb) to part-per-million (ppm) levels of various types of gases. That helps keep the air quality under control; otherwise, it can apply necessary measures to reduce pollution.

At Shilpa Enterprises, pack sizes of 5, 10, 25, 50, 100 pieces of multi foil gas sampling bag are readily available. The production of these bags takes place in a volume of 500ml, 1 liter, 2 liters, 3 liters, and 5 liters. The bag has a polypropylene (PP) valve with a hose connection. It can fit up to 7mm ID tubing and syringe port. It also has a replaceable silicon septum.

Air Sampling Bag

The Tedlar Air Sampling Bag are made of DuPonts 2mil Tedlar® PVF film. Tedlar® PVF film is tough, durable, and considered chemically inert to a wide range of compounds.

Air Sampling Bag of Tedlar® film can be used for indoor air sampling, hazardous waste sites, leaking underground storage tanks, stack sampling, soil gas sampling, gas blending, calibration test standards, and most other gas sampling needs.

All of our stock bags feature an eyelet and our patent-pending single 2-in-1 fittings that combine the valve and septum into one.

The Air Sampling Bag are available with polypropylene, stainless steel, and PTFE fittings. Please contact us for custom sizes.

• 2-in-1 Polypropylene fitting combines both the valve and septum port

• 0.2 mil Tedlar film provides excellent sample preservation and durability

• Valve reliably achieves a positive open or closed setting

Valve and seam sealing process ensure bags remains sturdy and leak proof

Specification:

• Material of Film: – PVF
• Material of valve – Polypropelene
• Film Thickness – 2 mil
• Operating Temperature – 477 Degree Kelvin
• Tensile Strenght – 7,980 psi
• Material Specific Gravity – 1.69 g/m

These bags manufactured by using polyvinylidene fluoride (PVDF) film. The commercial name PVDF is Kynar; hence, these bags are also known as a Kynar bag worldwide. It is robust, sturdy, and has excellent resistance to chemicals like acids, bases, halogenated solvent, hydrocarbons, alcohols, salts, etc. These bags are also resistant to UV radiations, moisture, and Heat. The maximum operating temperate is 73-degree Celsius.

The Kynar gas sampling bags come in a variety of sizes ranges from 500ml to 10 liters. It can be customized up to 1000 liter capacity. The thickness of the PVDF film is 3mil or 0.0762mm. The dimensions of the bags vary as per their allocated capacity. It is heat-sealed adequately from all four sides to prevent leakage. Generally, the Polypropylene (PP) valve used in the Kynar bag, but customization can be possible as per client requirement. It is 2 in 1 combo valve with 7mm hose for sample inlet.

These bags manufactured by using polyvinylidene fluoride (PVDF) film. The commercial name PVDF is Kynar; hence, these bags are also known as a Kynar bag worldwide. It is robust, sturdy, and has excellent resistance to chemicals like acids, bases, halogenated solvent, hydrocarbons, alcohols, salts, etc. These bags are also resistant to UV radiations, moisture, and Heat. The maximum operating temperate is 73-degree Celsius.

The Kynar gas sampling bags come in a variety of sizes ranges from 500ml to 10 liters. It can be customized up to 1000 liter capacity. The thickness of the PVDF film is 3mil or 0.0762mm. The dimensions of the bags vary as per their allocated capacity. It is heat-sealed adequately from all four sides to prevent leakage. Generally, the Polypropylene (PP) valve used in the Kynar bag, but customization can be possible as per client requirement. It is 2 in 1 combo valve with 7mm hose for sample inlet.

A multi foil gas sampling bag (multi-layer gas sampling bag) is a type of sampling bag that is functional to collect whole air samples. The device specializes in collecting high-level VOCs and permanent gases. The Multifoil gas sampling bag is a reliable device that shows gas stability in lower molecular weights. It is the best option in traditional canisters, helpful in collecting indoor and outdoor air samples. The structure of the bag consists of 4 layers. The outermost layer of the bag has 60-gauge nylon followed by two layers of 0.0003-inch thick aluminum foil. The last (innermost) layer of the bag has 0.002-inch thick роlуеthуlеnе. As the bag consists of aluminum at the outermost layer, researchers term it an aluminum foil gas sampling bag.

The air sampling activity is necessary to meet the standards and norms set by the government for pollution control and air quality index values. The examinations are essential to check part-per-billion (ppb) to part-per-million (ppm) levels of various types of gases. That helps keep the air quality under control; otherwise, it can apply necessary measures to reduce pollution.

At Shilpa Enterprises, pack sizes of 5, 10, 25, 50, 100 pieces of multi foil gas sampling bag are readily available. The production of these bags takes place in a volume of 500ml, 1 liter, 2 liters, 3 liters, and 5 liters. The bag has a polypropylene (PP) valve with a hose connection. It can fit up to 7mm ID tubing and syringe port. It also has a replaceable silicon septum.

A multi foil gas sampling bag (multi-layer gas sampling bag) is a type of sampling bag that is functional to collect whole air samples. The device specializes in collecting high-level VOCs and permanent gases. The Multifoil gas sampling bag is a reliable device that shows gas stability in lower molecular weights. It is the best option in traditional canisters, helpful in collecting indoor and outdoor air samples. The structure of the bag consists of 4 layers. The outermost layer of the bag has 60-gauge nylon followed by two layers of 0.0003-inch thick aluminum foil. The last (innermost) layer of the bag has 0.002-inch thick роlуеthуlеnе. As the bag consists of aluminum at the outermost layer, researchers term it an aluminum foil gas sampling bag.

The air sampling activity is necessary to meet the standards and norms set by the government for pollution control and air quality index values. The examinations are essential to check part-per-billion (ppb) to part-per-million (ppm) levels of various types of gases. That helps keep the air quality under control; otherwise, it can apply necessary measures to reduce pollution.

At Shilpa Enterprises, pack sizes of 5, 10, 25, 50, 100 pieces of multi foil gas sampling bag are readily available. The production of these bags takes place in a volume of 500ml, 1 liter, 2 liters, 3 liters, and 5 liters. The bag has a polypropylene (PP) valve with a hose connection. It can fit up to 7mm ID tubing and syringe port. It also has a replaceable silicon septum.